This week I was only in school for two days, missing Monday and Wednesday, however I was still able to get a lot done. I started the week...

This week I continued to work on my new PCB, first of getting the Multiplexer to work because the wires connecting SDA to A4 and SCL to...

This week I tried to continue working on my PCB, but there was a problem with the solder coming lose on some of the pins. I tried adding...

This week I finally fixed all the errors with my PCB. In order to test where the incomplete connections were, I used a multimeter to...

This week I focused on getting back into my old project after summer vacation. I started working on the Jump Meter project by doing more...

This week I tried to fix my PCB by removing the solder from the pad, but there was too much and it got stuck on the board, so I had to...

This week I worked more on my PCB. I soldered more parts on until I could successfully test the sensors with it. I also helped to build...

I started off this week by cutting out my PCB. I used vias to bring jump wires over the traces on the board. The first things that I...

I started off this week helping to move some desks from Metal Fab into the classroom. The rest of the week I spent working on my PCB. I...

This week I worked on finishing up the model of the jump meter. Along with this I made a list of all the parts I would need to create the...

I was only here for two days this week, so I wasn't able to get as much done as I wanted to. I started off the week by finishing my CAD...

This week I worked more on code, I finally got the Breakbeam sensors to work with both the pins on the metro mini and the multiplexer, as...

This week I mainly worked on the code for my jump meter. I started the week off by switching from the code I had been using for the past...

This week I worked on creating a PCB schematic for the Jump Meter in Fusion 360. I also worked on the physical components and made sure...

I was only here for two days this week but I did finally get the lightbox working. I faced a problem with the pins on my PCB getting bent...

This week I worked on finishing up my box. I started by sanding the sides down, and then I spray painted it. However it wasn't sanded...

This week I started getting back to work on my Lightbox, but I was having trouble keeping power plugged in. To fix this I made longer...

This week I was working on finishing up my lightbox. I finished up getting everything set up in the cardboard model. Afterward I printed...

I started this week off by printing a new smaller lightbox. Afterward I started to work on designing the inside of the box. I made...

hey